星载差分吸收光谱仪转动部件测试系统设计

大气与环境光学学报 ›› 2016, Vol. 11 ›› Issue (2): 103-110.

星载差分吸收光谱仪转动部件测试系统设计

柯蒋红，司福祺，付毅宾

（中国科学院安徽光学精密机械研究所环境光学与技术重点实验室，安徽合肥 230031）

收稿日期:2015-01-05 修回日期:2015-02-03 出版日期:2016-03-28 发布日期:2016-03-18
通讯作者: 柯蒋红（1991-），男，研究生，主要研究方向为光学转动部件的电机驱动。 E-mail:jhke@aiofm.ac.cn
作者简介:柯蒋红（1991-），男，研究生，主要研究方向为光学转动部件的电机驱动。
基金资助:
国家自然科学基金（41275037）、公益性行业（气象）科研专项经费项目（GYHY201106045-1）资助

Design of Driver of Rotating Parts of Space-Borne Spectrometer

KE Jianghong, SI Fuqi, FU Yibing

（Key Laboratory of Environment Optics & Technology, Anhui institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Hefei, Anhui 230031,China）

Received:2015-01-05 Revised:2015-02-03 Published:2016-03-28 Online:2016-03-18

摘要/Abstract

摘要：

基于星载差分吸收光谱仪转动部件控制需求，设计了星载光谱仪转动部件的测试系统。采用微动开关复位加定步的电机运动方式实现电机的精确定位。采用脉冲调制（PWM）的方式实现驱动电流的精细调节。并搭建平台对系统进行重复性测试，实验结果表明，测试系统具有较高的可靠性和稳定性，能够满足光谱仪的精确定位要求，使电机在工作寿命内按计划完成定标工作。

关键词: 星载光谱仪, 转动部件, 可靠性, 精确定位

Abstract:

Based on the need of spaceflight design, a driver of rotating parts of a space-borne spectrometer was designed to accurately control the locating of the three motors. Motor’s accurate positioning is completed by resetting and fixed steps of micro switch. Fine adjustment of driving current is completed by using PWM mode. A platform was built and repeated tests were given to the design. The result showed that the system has high reliability and stability and can fulfill the requirements of accurate locating to make sure that the motors can finish the calibration according to the arrangement.

Key words: space-borne spectrometer, rotating parts, high reliability, accurate locating

中图分类号:

TP732

柯蒋红司福祺付毅宾. 星载差分吸收光谱仪转动部件测试系统设计[J]. 大气与环境光学学报, 2016, 11(2): 103-110.

KE Jiang-Hong, SI Fu-Qi, FU Yi-Bin. Design of Driver of Rotating Parts of Space-Borne Spectrometer[J]. Journal of Atmospheric and Environmental Optics, 2016, 11(2): 103-110.

参考文献

[1] Wang Zhiyu. Research of Two-Phase Hybrid Stepper Motor Driving Control System [D]. Shenyang: Master’s Thesis of Shenyang University of China 2008: 21-23(in Chinese).
王志宇. 两相混合式步进电动机驱动控制系统研究[D]. 沈阳: 沈阳工业大学硕士论文, 2008: 21-23.
[2] Zhou Yanqiu. Research of Stepper Motor Locating Control System [D]. Dalian: Master’s Thesis of Dalian Jiaotong University, 2009: 4-8(in Chinese).
周艳秋. 步进电机定位控制技术的研究[D]. 大连: 大连交通大学硕士论文2009: 4-8
[3] Wang Chenguang, Sun Yunqiang, Xu Hongying. Design and analysis of MCU control of stepper motor [J]. Foreign Electronic Measurement Technology, 2008, (9): 39-41(in Chinese).
王晨光, 孙运强, 许鸿鹰. 步进电机的单片机控制设计分析 [J]. 国外电子测量技术, 2008, (9): 39-41.
[4] Li Wei, Wu Qinghua. Design of motion control platform based on C8051F020 and LMD18200 [J]. Journal of Hubei University of Technology, 2009, 24(5): 78-80(in Chinese).
李伟, 吴庆华. 基于cc8051F020与LMD18200的运动控制平台 [J]. 湖北工业大学学报, 2009, 24(5): 78-80.
[5] Regan Tim. A DMOS 3A, 55V, H-Bridge: The LMD18200 [OL]. http://oap.sourceforge.net/datasheets/AN-694.pdf. [6] Ning Shouxin. Comparison of open-loop and closed-loop control of stepper motor [J]. Small and Special Electrical Machines, 1990, (4): 26-28(in Chinese).
宁守信. 步进电动机开环与闭环控制比较 [J]. 微特电机, 1990, (4): 26-28.
[7] Zhang ming. Basic principle of stepper motor [J]. Science & Technology Information, 2006, (9): 83-84(in Chinese).
张明. 步进电机的基本原理 [J]. 科技信息, 2006, (9): 83-84.
[8] Wang Jimin, Ma Wenping, Fu Zhanwu. Application of proximity switch in the technological transformation of electromechanical equipment [J]. China Science & Technology Overview, 2013, (4): 50-52(in Chinese).
王继民, 马文平, 付战武. 接近开关在机电设备技术改造中的应用 [J]. 高端装备制造, 2013, (4): 50-52.
[9] Liu Wei. Application of PWM in Motor Driving Control [D]. Hefei: Master’s Thesis of Hefei University of Technology, 2009: 10-28(in Chinese).
刘伟. PWM技术在电机驱动控制中的应用 [M]. 合肥: 合肥工业大学硕士论文, 2009: 10-28.