大气与环境光学学报 ›› 2012, Vol. ›› Issue (3): 227-234.

• 光电技术 • 上一篇    下一篇

车载多普勒测风激光雷达系统的隔振设计

陈超1, 宋小全1, 夏金宝2   

  1. (1 中国海洋大学海洋遥感研究所,山东 青岛 266003; 
    2 青岛市光电工程技术研究院,山东 青岛 266071)
  • 收稿日期:2011-10-24 修回日期:2011-12-20 出版日期:2012-05-28 发布日期:2012-05-24
  • 通讯作者: 陈 超(1982-),男,山东青岛人,硕士生,主要从事大气激光雷达的研究。 E-mail:Email: irvinc@126.com
  • 作者简介:陈 超(1982-),男,山东青岛人,硕士生,主要从事大气激光雷达的研究。
  • 基金资助:

    国家自然科学基金(40906019、40905005)、中国气象科学院灾害天气国家重点实验室开放课题(2010LASW-A07)和城市气象科学研究基金(UMRF201002)资助

Vibration Isolation Design for Mobile Doppler Wind Lidar

CHEN Chao1, SONG Xiao-quan1, XIA Jin-bao2   

  1. (1 Ocean Remote Sensing Institute, Ocean University of China, Qingdao 266003, China; 
    2 Qingdao Academy for Opto-Electronics Engineering, Qingdao 266071, China)
  • Received:2011-10-24 Revised:2011-12-20 Published:2012-05-28 Online:2012-05-24

摘要:

为了防止车载多普勒测风激光雷达运动过程中振动对系统的不良影响,保证系统测量的稳定性和精度,对车载测风激光雷达中的机柜和光学平台进行隔振设计。选用IDC公司SB型和M型金属钢丝绳隔振器分别作为机柜和光学平台的隔振器并合理布置,通过计算可得峰值响应频率都小于干扰频率,冲击位移小于隔振器最大形变量,通过隔振效率和干扰频率的关系曲线图发现隔振效率达80%以上。最后,通过隔振前后激光雷达锁频实验效果对比可以看出隔振系统安装后锁频效果有了显著提升,通过运动中测量的1 km高度径向风速正弦曲线拟合进一步验证了在运动测量中隔振设计的可靠性。

关键词: 车载多普勒测风激光雷达, 机柜, 光学平台, 隔振设计, 锁频, 运动测量

Abstract:

In order to avoid adverse vibration influence on mobile Doppler wind lidar when it is moving and ensure measurement's stability and accuracy, a vibration isolation system is designed for cabinets and optical table of mobile wind lidar. SB and M series wire rope isolators of IDC company are respectively selected as the isolators of cabinets and optical table. By calculating, the peak response frequency is less than disturbing frequency and shock displacement is less than the max deflection of the isolators. The relation graph between vibration isolation efficiency and disturbing frequency illustrates that the vibration isolation efficiency is more than 80%. Finally, comparing the locking frequency effect in the same vibration environment before and after vibration isolation system installed, it is obvious that the vibration isolation system improves the frequency stability. It is further certified the reliability of isolation by sine curve fitting of light of sight (LOS) velocity at the elevation of 1 km during moving measurements.

Key words: mobile Doppler wind lidar, cabinet; optical table, vibration isolation design, frequency locking; moving measurements

中图分类号: