加热炉板坯表面温度与氧化皮温度的鉴别方法研究

大气与环境光学学报 ›› 2014, Vol. 9 ›› Issue (6): 476-481.

• 光电技术 • 上一篇

加热炉板坯表面温度与氧化皮温度的鉴别方法研究

吴海滨1，张明1，唐磊2

（ 1. 安徽大学物理与材料科学学院，安徽合肥 230039；
2. 合肥师范学院电子信息工程学院，安徽合肥 230031)

收稿日期:2014-03-27 修回日期:2014-05-07 发布日期:2014-11-14
通讯作者: 唐磊（1972-），男，博士研究生，主要从事激光遥感信息控制与处理方面的研究。 E-mail:tanglei_66@163.com
作者简介:吴海滨（1962-），男，安徽合肥人，教授，博导，从事特种工业电视系列产品的开发设计及图像信息处理方面的研究工作。
基金资助:
科技部创新基金项目（07C26213400516）资助

Identification Method of Slab Surface Temperature and Oxidation Skin Temperature in Heating Furnace

WU Hai-bin1，ZHANG Ming1, TANG Lei2

1 School of Physics and Material Science, Anhui University, Hefei 230039;
2 Department of Electronic Engineering, Hefei Normal University, Hefei 230031 )

Received:2014-03-27 Revised:2014-05-07 Online:2014-11-14

摘要/Abstract

摘要：

加热炉加热过程中板坯表面温度与内部温度的均匀程度直接影响板坯的加工质量，要使板坯在加热过程中温度达到内外均匀一致，从入钢经预热、加热段至均热需要有较长的加热周期，而高温环境下滞留时间长，在板坯表面易形成较多的氧化皮,它是钢铁在高温下发生氧化作用而形成的腐蚀产物，由氧化亚铁、四氧化三铁、三氧化二铁组成，通常工业生产中也称为“铁鳞”。在加热炉加热过程中炉膛温度随着空燃比、流量及工艺要求等不断发生变化，铁鳞的温度随着炉膛温度上下波动，对准确测量和判断板坯表面温度造成影响，因此，如何从瞬态波动的铁鳞温度中分离出板坯表面温度具有重要且实际的意义，以下从几种图像分割算法入手，通过比较得出一种比较适用的区域生长的方法，从而区分出铁鳞和板坯的温度，准确获得所需的表面温度。

关键词: 区域生长, 种子点, Log算法, Canny算法

Abstract:

The uniformity of the heating process about the internal and surface temperature of the slab directly affects the processing quality of the slab. To make the internal and surface temperature of the slab uniform in the heating process, a long heating cycle is needed from street entering to the preheated and the heating section, and to soaking of the slab. But the longer residence time at the high temperature, the surface of the slab is more easily oxided, which is the result of oxidation corrosion of steel at high temperatures and in industrial production is also referred to as "the scale". In the heating furnace with changes of the air-fuel furnace temperature, flow and process requirements, the temperature of the scale also fluctuated, which played a role in the accurate measurement of the slab surface temperature. Therefore how to separate the slab surface temperature is important. Several image segmentation algorithms are compared to obtain the suitable region growing method, which can distinguish iron scales from the slab temperature and obtain the desired temperature.

Key words: regional growth, seeds, Log algorithm, Canny algorithm

中图分类号:

P391

吴海滨张明唐磊. 加热炉板坯表面温度与氧化皮温度的鉴别方法研究[J]. 大气与环境光学学报, 2014, 9(6): 476-481.

WU Hai-Bin, ZHANG Ming, TANG Lei. Identification Method of Slab Surface Temperature and Oxidation Skin Temperature in Heating Furnace[J]. Journal of Atmospheric and Environmental Optics, 2014, 9(6): 476-481.

参考文献

[1] Zhao Jun, Huo Jian. Walking beam reheating furnace atmosphere burning effect on numerical simulation of billet oxidation [J]. Journal of Iron and Steel Research, 2010, 22 (11):11-14(in Chinese).
赵军, 霍健. 步进式加热炉内气氛对钢坯氧化烧损影响的数值模拟 [J]. 钢铁研究学报, 2010, 22(11): 11-14.
[2] Cui Jialin, Zhu Tong. Experimental heat transfer process and the oxidation furnace burning billet numerical simulation study [J]. Energy-Saving Technology, 2013, 31(178): 99-107(in Chinese).
崔家林, 朱彤. 实验炉内钢坯传热过程及其氧化烧损的数值模拟研究 [J]. 节能技术, 2013, 31(178): 99-107.
[3] Liu Zhanzeng, Zheng Zhaoping, Ding Cuijiao. Burning furnace oxidation causes and countermeasures [J]. Metallurgy Energy, 2004 (2): 30-32(in Chinese).
刘占增, 郑兆平, 丁翠娇. 加热炉氧化烧损原因与对策分析 [J]. 冶金能源, 2004(2): 30-32.
[4] Liu Chunhong, Wu Haibin, Wang Peng. Uncooled Infrared Temperature range expansion of the study [J]. Atmospheric and Environmental Optics, 2011, 6(5): 398-402(in Chinese).
刘纯红, 吴海滨, 王鹏. 非制冷焦平面红外热像仪测温范围拓展研究 [J]. 大气与环境光学学报, 2011, 6(5): 398-402.
[5]Jiang Xuedong, Wei Sui, Wu Haibin. The application of image processing in measurement of furnace flame temperature field [J]. Microcomputer Development, 2002, 12(3): 34-37(in Chinese).
姜学东, 韦穗, 吴海滨. 图像处理技术在炉膛火焰温度场分布中的应用 [J]. 微机发展, 2002, 12(3): 34-37.
[6] Zoufuhui, Li Zhongke. Branch contrast image edge detection algorithm analysis [J] Journal of Computer Applications, 2008, 28: 215-216(in Chinese).
邹福辉, 李忠科. 图像边缘检测算法的对比分析 [J]. 计算机应用, 2008, 28: 215-216.
[7] Yu Qingying, Wang Hu, Wu Jianguo. Research of image segmentation and test of image samples [J]. Microcomputer Development, 2005, 15(10): 150-151(in Chinese).
俞庆英, 王虎, 吴建国. 对图像分割技术的研究与实例图像测试 [J]. 微机发展, 2005, 15(10): 150-151.
[8] Ma Yan, Zhang Zhihui. Comparison operator of several edge detection [J]. Industry and Mine Automation, 2004, (1): 54-55(in Chinese).
马艳, 张治辉. 几种边缘检测算子的比较 [J]. 工矿自动化, 2004, (1): 54-55.
[9]Chen Fangxin. Image segmentation based on region growing techniques [J]. Science and Technology Information, 2008, 15: 58-59(in Chinese).
陈方昕. 基于区域生长法的图像分割技术 [J]. 科技信息, 2008, 15: 58-59.
[10] Li Xuhui1, Ci Linlin, Wang Rui. An object extraction method based on region growing [J]. Microelectronics & Computer, 2008, 25(12): 183-186(in Chinese). 李旭辉, 慈林林, 王蕊. 一种基于区域生长的目标提取算法 [J]. 微电子学与计算机, 2008, 25(12): 183-186.

加热炉板坯表面温度与氧化皮温度的鉴别方法研究

Identification Method of Slab Surface Temperature and Oxidation Skin Temperature in Heating Furnace

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价