大气与环境光学学报

• 光电技术 • 上一篇    下一篇

应用于海洋观测的TDI-CCD驱动电路的设计

张元贞1,2,孙晓兵1,骆冬根1   

  1. 1中国科学院安徽光学精密机械研究所中国科学院通用光学定标与表征技术重点实验室 安徽合肥 230031;
    2中国科学技术大学, 安徽合肥 230026
  • 出版日期:2019-09-28 发布日期:2019-09-26

Design of Driving Circuit of TDI-CCD  for Ocean Observation

  • Published:2019-09-28 Online:2019-09-26

摘要: 面阵CCD及线阵CCD不能胜任海洋目标观测的要求,选用具有高信噪比高灵敏度的时间延迟积分CCD(Time delay integration CCD, TDI-CCD)作为
探测器并实现其驱动电路。在图像采集过程中,TDI-CCD探测器使用两个读取端口输出。
该探测器驱动电路产
生TDI-CCD和A/D的驱动时序。CCD的模拟输出信号被A/D采样,转换成可被计算机识别
的数字信号。采用FPGA作为主控芯片,产生驱动时序,接收被A/D转换过的数字信号,
并发送图像至计算机。利用相关双采样(Correlated double sampling, CDS)技术滤除TDI-CCD模
拟输出信号的相关噪声,提高信号的信噪比。现场可编程门阵列(Field programmable
gate array, FPGA)代码在ISE14.7下进行仿真,实验表明,研制的TDI-CCD驱动电路能够产生CCD要求的驱动时序。

关键词: TDI-CCD, 驱动时序, 现场可编程门阵列(FPGA), 相关双采样(CDS)

Abstract: Because array CCD and linear CCD don't meet the requirement of observing
the ocean goal, the time delay
integration CCD (TDI-CCD) which has high sensitivity and high signal to noise
ratio is selected and driving circuit is designed. Two ports of  outputs the signal during image capture. The driver
circuit generates the time sequence of the CCD and the A/D. The output analog
signal of the CCD is sampled by A/D and converted to the digital signal which
can be recognized by computer. FPGA is used to driving CCD and A/D, receiving the
digital signal after A/D converts, and sending the imaging data to computer.
The correlated double sampling (CDS) can decrease some related noise which
analog output signal of the TDI-CCD has, and increase the signal to noise
ratio. The code of field programmable gate array (FPGA) is simulated on the
ISE14.7. The experiment results prove that the driving circuit can
generate right sequence that CCD needs.

中图分类号: