Orthogonal Elliptical Reflector Design and Analysis of Loading

Abstract

Abstract:

In order to satisfy the requirements of the orthogonal elliptical mirror space structures, the design process must grasp the main line of reliability requirements and conduct simulation. The initial plan is confirmed, glue point locations are aided designed by using ANSYS design optimization module, and the weight loss of frame is obtained by useing the topology optimization module. Finally, static and modal analysis and testing are carried out. The results show that the maximum stress value of the mirror is 1.5 MPa, the pad is 0.98 MPa, a first-order natural frequency is 181.8 Hz. All of them are within safety limits and meet the space requirements.

Key words: orthogonal elliptical mirror, lightweight, finite element method, nonlinear

CLC Number:

V447+.1

SONG Mao-Xin, YANG Wei-Feng, HONG Jin. Orthogonal Elliptical Reflector Design and Analysis of Loading[J]. Journal of Atmospheric and Environmental Optics, 2010, 5(3): 239-246.

References

[1] Santa Barbara Research Center. Earth observing scanning polarimeter [C]. New York, NASS; 1990.
[2] Jia Xuezhi, Jin Guang, Zhang Lei. Design and optimization of lightweight outer baffle for space camera [J]. Optics and Precision Engineering, 2008, 16(8): 1560-1565(in Chinese).
贾学志, 金光, 张雷. 空间相机外遮光罩结构设计与优化 [J]. 光学精密工程, 2008, 16(8): 1560-1565.
[3] Song Liqiang, Yang Shimo, Chen Zhiyuan. Finite element analysis and application of beryllium tiptilt mirror in space solar telescope [J]. Optics and Precision Engineering, 2007, 15(11): 1704-1711(in Chinese).
宋立强, 杨世模, 陈志远. 空间太阳望远镜中铍摆镜的有限元分析与应用 [J]. 光学精密工程, 2007, 15(11): 1704-1711.
[4] Yang Hongbo. Computer simulation of shrink ratio experiment for aerospace seal window [J]. Optics and Precision Engineering, 1996, 4(6): 41-46.
杨洪波. 航天密封窗口安全可靠性缩比实验计算机仿真 [J]. 光学精密工程, 1996, 4(6): 41-46.
[5] Yoder P R Jr. Opto-Mechanical Systems Design [M]. 3rd edition, USA SPIE, 2005: 401-446.
[6] Lu Zhiguo, Yang Ge, Lin Jianping. Study on influence of adhesive layer size on performance for single-lap bonding joint [J]. China Adhesives, 2009, 18(5): 1-3(in Chinese).
卢志国, 杨纥, 林建平. 胶层尺寸对单搭胶接接头性能的影响研究 [J]. 中国胶粘剂, 2009, 18(5): 1-3.
[7] Deng Yangfang. Study on Optimization Theory and Application of Ansys Program in Bridge Optimal Design [D]. Chongqing: Doctorial Dissertation of Chongqing Jiaotong University, 2009(in Chinese).
邓杨芳. 优化理论及ansys程序在桥梁优化设计中的应用研究 [D]. 重庆: 重庆交通大学硕士论文, 2009.
[8] Yang Pengfei. Finite Element Simulation of Crepe Sheet of Raw Rubber Based on Ansys [D]. Kunming: Doctorial Dissertaion of Kunming University of Science and Technilogy, 2008(in Chinese). 杨鹏飞. 基于ansys的生胶绉片的有限元模拟 [D]. 昆明: 昆明理工大学硕士论文, 2008.
[9] Wang Yeping, Zou Gengxin, Jiang Weimin. Topology optimization based on ANSYS software platform for adhesive layer and analysis on stress [J]. Machine Design and Research, 2009, 25(3): 110-113(in Chinese).
王野平, 邹更新, 姜伟民. 应用ANSYS平台的胶层拓扑优化及应力分析 [J]. 机械设计与研究, 2009, 25(3): 110-113.
[10] Huang Jianlong, Xie Guangjuan, Liu Zhengwei. Finite element analysis of superelastic rubber materials based on the Mooney-Rivlin and Yeoh model [J]. China Rubber/Plastics Technology & Equipment, 2008, 34(12): 23-26.
黄建龙, 解广娟, 刘正伟. 基于Mooney-Rivlin模型和Yeoh模型的超弹性橡胶材料的有限元分析 [J].橡塑技术与装备, 2008, 34(12): 23-26.