Investigation of Surface Form Evaluation Based on ISO10110-5
ZHAO Bing 1, WANG Wei 2, CHEN Lei 3
(1 Institute of Communications Engineering, PLA University of Science and Technology, Nanjing 210007, China;
2 The Broadcast Control Center of Jiangsu Broadcasting Cable Information Network Corporation Limited, Nanjing 210001, China;
3 School of Electronic Engineering and Optoelectronic Technology, Nanjing University of Science and Technology, Nanjing 210094, China)
DIAO Bing, WANG Wei, CHEN Lei. Investigation of Surface Form Evaluation Based on ISO10110-5[J]. Journal of Atmospheric and Environmental Optics, 2012, (4): 303-.
[1] Su Datu. Optical Testing Technology [M]. Beijing:Beijing Institute of Technology Press, 2001: 129-131(in Chinese).
苏大图. 光学测试技术 [M]. 北京: 北京理工大学出版社, 2001: 129-131.
[2] Xu Deyan. The optical elements and the drawing requirements of the eclectic international standard-ISO10110-5 [S]. 2000(in Chinese).
徐德衍. 光学元件及图纸技术要求的国际标准选编-ISO10110-5 [S]. 2000.
[3] Malacara D. Optical Shop Testing [M]. Transl. by Bai Guoqiang, et al. Beijing: China Machine Press, 1983: 443-464(in Chinese).
D 马拉卡拉. 光学车间检验 [M]. 白国强, 等译. 北京: 机械工业出版社, 1983: 443-464.
[4] ISO10110-5. Optics and optical instruments-Preparation of drawings for optical elements and systems-Part 5:Surface form tolerances, 1996. ISO10110-5.Optics and optical instruments-Preparation of drawings for optical elements and systems-Part 5:Surface form tolerances [S]. 1996.
[5] Yang Zhiwen. Optical Testing [M]. Beijing: Beijing Institute of Technology Press, 1995: 241-247(in Chinese).
杨志文. 光学测量 [M]. 北京: 北京理工大学出版社, 1995: 241-247.
[6] Xu Deyan. Several problems of technical requirements about the optical elements and the testing based on the new international standard [J]. Optical Instruments, 2002, 2(1): 24-27(in Chinese).
徐德衍. 光学元件技术要求与检验国际新标准的若干问题 [J]. 光学仪器, 2002, 2(1): 24-27.
[7] SAC. The method of the surface form deviation in the optical elements testing (aperture identification) GB2831-81 [S]. 1982(in Chinese).
国家标准总局. 光学零件的面形偏差检验方法(光圈识别)GB2831-81 [S]. 1982.